Phosban Reactor?????

Laura and Jim will be hosting the May meeting this Saturday the 12th and it will be the usual of food, drinks, raffle and fun.
 
Doors will be open at 6:00 pm for social talk and the meeting will start at 7:00.  Parking gets a little tight and the city says you can't park on 4th but there is a parking lot a block away.   Meeting is usually held in the backyard so feel free to bring your favorite lawn chair, weather permitting of course.

If you need address/directions, contact a club member.

Best if you park at Mini Mall (where the spaghetti establishment use to be)
 
You will get to see his new frag tank set up in the making.
 
Hope to see you there!

•    About the Club
•    MCMAC 2009
•    Constitution
•    Bylaws

[Guest]

Welcome, Guest.
Please login or register.

1 Hour 1 Day 1 Week 1 Month Forever

Login with username, password and session length

[The Apprentice]

I am going to try a 106 gpm Pump but reduce the flow by head and a flow regulation valve thanks for the help Rick I will let you know how i made out as for the Rowa Phos i bought 500 ML for 34.95 at Waves In Portland
http://www.marinedepot.com/md_viewItem.asp?idproduct=RW1115

Jeff,

I can't tell you what the flow rate is because it is determined by the boiling action from the water flowing up from the bottom of the canister through the media.  When the surface of the media appears to be boiliing then it is sufficiently fluidized and the flow rate is correct.  I suppose you could start out with a 90 gph powerhead and start with the valve closed down and slowly open it to determine if you are able to get the proper flow.  If not then bump up to a larger powerhead.  In looking at the discharge from my unit, it does not flow a lot of water.

Rick

[angelscrx]

Zul thank you very much for the Phosban Reactor. I was in shock for a little bit that you would even consider offering it to me.  I owe you big time thanks.  Let me know when you get rid of that clown and I will get you another frag of the orange cap.